FRP RESOURCE: Fiberglass Grating ang Fiberglass Products

Home>Products

Introduction:

GLOBALGRID pultruded grating is assembled by pultruded bearing bar("I" beam or "T" beam) and cross bar with a high percentage of fiberglass within the laminate, providing durability, extremely high unidirectional strength and stiffness. The cross bar is mechanically interlocked and epoxy bonded to the bearing bar.

Characteristics:

·Corrosion resistant
·High stiffness & light weight
·Impact resistant
·Fire retardant
·Slip resistant
·Unidirectional strength
·Non-conductive, non-magnetic, non-sparking
·Maintenance free
·Easy to fabricate and install

Typical used fields:

·Chemical ·Refining·Offshore·Pulp & Paper
·Marine·Plating·Electronics·Food & Beverage
·Water and Wastewater treatment

Typical applications:

·Flooring·Platforms·Walkways·Assembly Lines
·Trench Covers·Stairs·Catwalks·Ramps

GLOBALGRID Standard Grating Parameters

Shapes	1.0” T-Bar	1.0” T-Bar*	1.0” I-Beam	1.5” I-Beam	1.5” I-Beam*	2.0” I-Beam
Opening	18%, 35%	40%,50%,60%	40%,50%,60%	40%,50%,60%	40%,50%,60%	40%,50%,60%
Width	3ft, 4ft, 5ft
Length	8ft, 10ft, 12ft, 20ft
Resin	Orthophthalic(GP), Isophthalic, Vinyl Ester, (Phenolic)
Color	Light Gray, Dark Gray, Yellow, Green
Two surface choices: with or without an anti-skid grit surface. Standard panels come with cross bar spacing of 6” or optional 12” on center. Custom color and size are available upon request.

Note: Panel size are specified: Width x Length. Width is the measurement from end to end of the cross bars. Length is always the bearing bar length.